SOLIDWORKS-BASED MODELING OF AN AIR-BLOWING SYSTEM TO ENSURE HIGH-QUALITY FIBER REMOVAL FROM SAW TEETH
DOI:
https://doi.org/10.5281/zenodo.17994030Abstract
This study presents the development and SolidWorks-based modeling of an air-blowing system designed
to efficiently remove fibers from saw teeth. The effects of airflow direction, velocity, and pressure on fiber separation
efficiency were analyzed. Aerodynamic characteristics of the structure, optimal geometric parameters, and methods for
reducing process losses were determined. An improved design of the air-blowing system is proposed, enabling higher
fiber extraction quality and increased overall technological process efficiency in industrial applications
Keywords
Saw teeth, fiber separation, air-blowing system, SolidWorks, modeling, aerodynamics, optimization, technological processReferences
Knowlton, J. R., & Van der Sluijs, D. L. (1990). Cotton ginning research. United States Department of Agriculture,
Agricultural Research Service.
Khalfeev, A. R., & Yuldashev, B. (2014). Investigation of aerodynamic processes in cotton-cleaning machines. Applied
Mechanics and Materials, 701–702, 452–456. https://doi.org/10.4028/www.scientific.net/AMM.701-702.452
Boykin, J. S., & Baker, R. G. (2011). Energy efficiency improvements in modern cotton ginning systems. Journal of
Cotton Science, 15, 120–129.
Islam, M. S., & Jackson, R. D. (2019). CFD simulation of fiber–air interactions in ginning systems. Biosystems
Engineering, 178, 45–59. https://doi.org/10.1016/j.biosystemseng.2018.11.013
Kerekes, M. G., & Bennington, C. P. J. (1995). The effect of turbulent flow on fiber suspension behavior. Tappi Journal,
(2), 133–140.
Azizov Shuhrat Mamatovich, Simulation of the strength of a frame of a new Design acm gin machine under the
influence of external forces. SCIENCE AND INNOVATION INTERNATIONAL SCIENTIFIC JOURNAL VOLUME 2
ISSUE 7 JULY 2023 UIF-2022: 8.2 | ISSN: 2181-3337 http://scientists.uz/view.php?id=5021
Azizov Shuhrat Mamatovich “Calculation Energy of Efficiency New Ginning Machine” Engineering Vol.14 No.4-April
, 2022 https://doi:/10.4236/eng.2022.144016
Azizov Shuhrat Mamatovich, Farhod Uzoqov, Alijonov Shermuhammad, Ahmadjon Hasanov and Mirsharofiddin
Mirzakarimov (2022) “Calculation of Cost-Effectiveness of Molds Made of Aluminum, MDF and Steel” / Engineering,
, 320-328. https://doi:/10.4236/eng.2022.148025
Azizov Shuhrat Mamatovich, Farhod Uzoqov, Alijonov Shermuhammad, Ahmadjon Hasanov and Mirsharofiddin
Mirzakarimov (2022) “Statically Analysis of the Stress State of Saw Gins Consisting of 90,100,110,120, 130 Saws”.
Engineering, 14, 329-338. https://doi:/10.4236/eng.2022.148026
Azizov Shuhrat Mamatovich, Farhod Uzoqov, Mirshoroffiddin Mirzakarimov and Oybek Usmanov “Analysis of
Namangan 77 cotton in production line with different saw gins for short fiber yield” E3S Web Conf., 273 (2021) 07021
https://doi.org/10.1051/e3sconf/202127307021
Azizov Shuhrat Mamatovich, Muhammadaminhon Ibrohimov, Farhod Uzoqov and Mirshoroffiddin Mirzakarimov/ “The
modelling and introductions of new type ribs of lattice of the two cylinder of gin” E3S Web Conf., 273 (2021) 07020
Downloads
Published
How to Cite
Issue
Section
