OPTIMIZATION OF ROASTING TEMPERATURE FOR GOLD-BEARING CONCENTRATE

Authors

DOI:

https://doi.org/10.5281/zenodo.24141162

Abstract

This study investigates the effect of oxidative roasting temperature on the recovery efficiency of gold-bearing flotation concentrate obtained from technogenic waste of the Auminzo-Amantoy deposit. The initial concentrate contained 13.30 g/t gold, 0.64% sulfide sulfur, 0.58% organic carbon, and 8.32% moisture. Roasting experiments were conducted at 450, 550, 650, and 750°C for two hours in a muffle furnace. The influence of temperature was evaluated by analyzing changes in residual sulfide sulfur and organic carbon contents together with metal recovery. The results showed that gold recovery increased from 63.2% at 450°C to a maximum of 79.2% at 550°C. At 550°C, the residual sulfur and organic carbon contents were 0.31% and 0.54%, respectively. Increasing the temperature to 650°C reduced these values to 0.09% and 0.17%, respectively, while metal recovery decreased to 74.5%. At 750°C, recovery further declined to 65.6%. The findings identify 550°C as the optimum roasting temperature for maximizing metal recovery under the investigated conditions.

Keywords

gold-bearing flotation concentrate, oxidative roasting, roasting temperature, sulfide oxidation, precious metal recovery, technogenic waste

References

1. Surimbayev, B., Akcil, A., Bolotova, L., Shalgymbayev, S., & Baikonurova, A. (2024). Processing of Refractory Gold-Bearing Sulfide Concentrates: A Review. Mineral Processing and Extractive Metallurgy Review, 45(6), 573–591. https://doi.org/10.1080/08827508.2023.2230344

2. Qin, H., Guo, X., Tian, Q., Yu, D., & Zhang, L. (2021). Recovery of Gold from Sulfide Refractory Gold Ore: Oxidation Roasting Pretreatment and Gold Extraction. Minerals Engineering, 164. https://doi.org/10.1016/j

3. Hapid, A., & Zullaikah, S. (2023). Mahfud, Kawigraha A., Sudiyanto Y., Nareswari R.B., Quitain A.T. Oxidation of Sulfide Mineral and Metal Extraction Analysis in the Microwave-Assisted Roasting Pretreatment of Refractory Gold Ore. Arabian Journal of Chemistry, 16. https://doi.org/10.1016/j.arabjc.2023.105447

4. Zhang, Y. P., Yang, K., Fang, Y., Robledo-Cabrera, A., Peng, C. S., & Lopez-Valdivieso, A. (2021). Roasting Temperature Effect on the Recovery of Refractory Gold and Silver in Pyrite Concentrates. Journal of Mining and Metallurgy, Section B: Metallurgy, 57(2), 235–243. https://doi.org/10.2298/JMMB200911019Z

5. Ruan, S., Wang, C., Jie, X., Yin, F., Zhang, Y., Yao, Z., & Chen, Y. (2022). Kinetics of Pyrite Multi-Step Thermal Decomposition in Refractory Gold Sulphide Concentrates. Journal of Thermal Analysis and Calorimetry, 147(5), 3689–3702. https://doi.org/10.1007/s10973-021-10761-y

6. Komnitsas, C., & Pooley, F. D. (1989). Mineralogical Characteristics and Treatment of Refractory Gold Ores. Minerals Engineering, 2(4), 449–457. https://doi.org/10.1016/0892-6875(89)90080-0

7. Wang, X., Qin, W., Jiao, F., Yang, C., Cui, Y., Li, W., Zhang, Z., & Song, H. (2019). Mineralogy and Pretreatment of a Refractory Gold Deposit in Zambia. Minerals, 9(7). https://doi.org/10.3390/min9070406

8. Jin, J., Han, Y., Li, H., Huai, Y., Peng, Y., Gu, X., & Yang, W. (2019). Mineral Phase and Structure Changes during Roasting of Fine-Grained Carbonaceous Gold Ores and Their Effects on Gold Leaching Efficiency. Chinese Journal of Chemical Engineering, 27(5), 1184–1190. https://doi.org/10.1016/j.cjche.2018.08.006

9. Marsden, J. O., & House, C. I. (2006). The Chemistry of Gold Extraction. Society for Mining.

10. Adams, M. D. (2016). (Ed.). Gold Ore Processing: Project Development and Operations. Elsevier. https://doi.org/10.1016/C2015-0-00699-2

11. La Brooy S.R., Linge H.G., Walker G.S. Review of Gold Extraction from Ores. (1994). Minerals Engineering, 7(10), 1213–1241. https://doi.org/10.1016/0892-6875(94)90114-7

12. Wang, S., Wu, J., & Jiao, F. (2025). Pretreatment and Extraction of Gold from Refractory Gold Ore in Acidic Conditions. Minerals, 15(4). https://doi.org/10.3390/min15040340

13. Aylmore, M. G., & de Klerk, L. W. (2013). Conditions and Design Considerations for Maximising Recoverable Gold in Roasting of Refractory Gold Ores. Proceedings of World Gold, 375–388.

14. Mao, Y., Ying, H., Yang, Y., Liu, M., & Li, X. (2026). Influence of Oxidation Roasting on Pore Structure Evolution and Gold Extraction in Refractory Gold Concentrate. Minerals, 16(9). https://doi.org/10.3390/

Downloads

Published

2026-11-01

How to Cite

Xujakulov, N. B. (2026). OPTIMIZATION OF ROASTING TEMPERATURE FOR GOLD-BEARING CONCENTRATE. Innovation Science and Technology, 4(11), 35–39. https://doi.org/10.5281/zenodo.24141162
Vol. 4 No. 11 (2026): Innovation Science and Technology